DAB EVOSTA2 20-105/130 SOL PWM (1/2") electronic circulation pump for solar systems

Product description

EVOSTA2 SOL electronic circulation pumps with permanent magnet synchronous motor and frequency converter designed for solar systems. The range of circulation pumps ensures high efficiency in all applications and brings significant energy savings.
The pump contains an electronic device to detect changes in pressure in the system and automatically adjusts the power, ensuring maximum efficiency with minimal energy consumption.
All models have one control sequence button, a vent plug and allow manual release of the motor shaft. The cast iron body is cataphoretic painted, the casing is made of stainless steel. A version controlled by an external PWM signal is available (1.5 m power cable).

Pumped liquid: clean, free of solids and mineral oils, non-viscous, chemically neutral with properties close to water (max. glycol content 50%)

Parameters

Operating range od 0 do 4 m3/h
Displacement až do 14,5m
Liquid temperature range od -10 °C do +110 °C (130 °C při 60 °C okolní teploty)
Maximum working pressure 10 bar (1000 kPa)
Degree of protection IPX4
Insulation class F
Installation s horizontální polohou hřídele motoru
Voltage 1x230 V/50/60 Hz
Hmax discharge height 10,5 m
Flow rate Qmax [m^3/hour] 3,6 m^3/hod

Evaluation

0 Evaluation

For the last time
visited
-24 %
Alternatives
DHW circulation pumps

In stock at the supplier
  • Operating range
    od 0 do 4 m3/h
  • Displacement
    až do 14,5m
  • Liquid temperature range
    od -10 °C do +110 °C (130 °C při 60 °C okolní teploty)
  • Maximum working pressure
    10 bar (1000 kPa)
  • Degree of protection
    IPX4
  • Insulation class
    F
  • Installation
    s horizontální polohou hřídele motoru
  • Voltage
    1x230 V/50/60 Hz
  • Hmax discharge height
    10,5 m
  • Flow rate Qmax [m^3/hour]
    3,6 m^3/hod
637,88 € 484,81 400,67 without VAT
Alternatives
hose clamps

In stock
  • Load moment
    min 23 Nm
  • Screw
    M10x110
  • Thickness
    1
  • Width
    26 mm
  • Inner diameter min. (mm)
    425
  • Inner diameter max. (mm)
    437
  • Material
    nerez
  • Screw material
    nerez
7,65 6,33 without VAT
-7 %
ambulance

In stock
34,28 € 31,88 26,35 without VAT
Alternatives
Sea Land Waterworks

Info in store
  • Volume [l]
    80
380,35 314,34 without VAT
Alternatives
hose clamps

In stock
  • Inner diameter min. (mm)
    7,8
  • Inner diameter max. (mm)
    9,5
  • Width
    5 mm
  • Material
    nerez
0,11 0,09 without VAT
-15 %
Alternatives
brass fittings

In stock
3,78 € 3,22 2,66 without VAT
-3 %
fittings for IBC containers

In stock
3,92 € 3,80 3,14 without VAT
-10 %
Alternatives / Variants
pumping technology

Info in store
  • Maximum flow rate (l/min)
    100
  • Maximum displacement (m)
    226
  • Input voltage (V)
    400
  • Rated motor power - P2 (kW)
    3
  • Protection level (IP)
    68
  • Max. immersion depth (m)
    150
  • Max. medium temperature (°C)
    35
  • Cable length (m)
    2
1 379,51 € 1 241,57 1 026,09 without VAT
Alternatives
hose clamps

In stock
  • Load moment
    min 23 Nm
  • Screw
    M10x110
  • Thickness
    1
  • Width
    26 mm
  • Inner diameter min. (mm)
    506
  • Inner diameter max. (mm)
    518
  • Material
    nerez
  • Screw material
    pozink
4,06 3,36 without VAT
Alternatives
hose clamps

In stock
  • Load moment
    min 23 Nm
  • Screw
    M10x110
  • Thickness
    1
  • Width
    26 mm
  • Inner diameter min. (mm)
    415
  • Inner diameter max. (mm)
    425
  • Material
    nerez
  • Screw material
    pozink
3,22 2,66 without VAT