IDROSOM 36/100 3kW 400V cable 2 m pump 4" for well

Product description

DESCRIPTION
Multistage electric submersible pumps for boreholes from 110mm. Installation in households, agriculture, civil and industrial environments.
They are suitable for pumping clean water from wells, tanks and reservoirs and are designed to meet the parameters of the European ErP directive (ErP Directive - Environmentally Friendly Design of Water Pumps. The Idrosom /60 and /100 submersible pumps successfully meet the efficiency parameters approved by the European Commission for the best available technology on the market.
market (MEI index ≥ 0.7). to ensure the best possible efficiency and reduce energy consumption to the lowest possible level).

They are recommended for pressurized water systems in family houses, apartment buildings, irrigation and fire protection systems.

Asynchronous AC electric motor with coolant and rewinding, with squirrel-cage rotor. Insulation class F.
Resin-insulated cable set to prevent water from entering the motor ('S' series motors).
Shaft mounted on ball bearings and mechanical seal.
Both the shaft and the coupling meet NEMA standards.

APPLICATION FEATURES - Hydraulic part:
Minimum depth of pumped liquid (m) 0.8
Maximum pumped water temperature (°C) 60
pH of the pumped liquid 6 - 10
Maximum sand content (g/m3) 150
Suitable for horizontal operation (inclusive) 23/60 18/100 17/180 12/250

MATERIALS - Hydraulic part
Discharge body and suction body - Stainless steel AISI304
Body, screws and nuts - Stainless steel AISI304
Shaft - Stainless steel AISI304
Coupling - Stainless steel AISI316
Impellers and diffusers - Noryl® reinforced with glass fibers, certified for drinking water
Upper bearing - Rubber with AISI31 stainless steel rotating element

FEATURES AND APPLICATIONS - ENGINE:
IP protection IP68
Operating mode Continuous S1
Maximum diving depth (m) 150
Maximum number of starts per hour 30
Maximum pumped water temperature (°C) 35
pH of the pumped liquid 6 - 10
Suitable for frequency converters - Three-phase versions only
Suitable for horizontal operation (

ENGINE:
4" S Series - 4" E Series
Housing Stainless steel AISI304
Shaft clamp Stainless steel AISI303 Stainless steel AISI304
Upper part Brass OT58
Nickel-plated cast iron
with protection Stainless steel
AISI304 steel
Elastomers NBR Rubber
Mechanical seal Graphite and alumina
PVC cable ACS AD8 (for permanent immersion in drinking water)
Cross-linked rubber ACS AD8 (for permanent immersion in drinking water)

Parameters