OEZ LETOHRAD Motor starter SM1E-6.3 (4 - 6.3)

Switching and protecting motors up to 32 A. Short-circuit protection and overload protection. The device switches off in the event of a phase failure. More information
In stock
47,96 € 46,52 38,45 € without VAT
pc
Do you need advice?
Mon-Fri 7:00 - 16:00
Parameters
  • Code80972546
  • EAN8590125392651
  • Manufacturer code80972546
  • Weight (gross)250 g
  • Manufacturer OEZ LETOHRAD

Product description

Features

  • The device is equipped with compensation for the influence of ambient temperature.
  • The motor starters are controlled by two buttons, one for on and one for off. The one for off can be locked with a padlock with a shaft diameter of max. 4 mm2.
  • The thermal trigger can be set using the control dial located on the front of the device.
  • The instantaneous overcurrent release is fixed at 14x In

Evaluation

0 Evaluation

For the last time
visited
-3 %
motor circuit breakers

In stock
47,96 € 46,52 38,45 without VAT
Alternatives
Sea Land Waterworks

Info in store
  • Flow rate Qmax [l/min]
    60 l/min
  • Displacement Hmax [m]
    55 m
  • Warranty period [months]
    24 months
  • Cable length [m]
    2 m
  • Rated motor power [W]
    740 W
  • Max. Temperature [°C]
    30 °C
  • Pump design
    superficial
  • Rated voltage
    230 V
  • Drive type
    Electric motor
  • Instructions in Czech
    Yes
  • Volume [l]
    50
333,21 275,38 without VAT
Alternatives
hose clamps

In stock
  • Load moment
    min 13 Nm
  • Screw
    M6x50
  • Thickness
    0,8
  • Width
    20 mm
  • Inner diameter min. (mm)
    32
  • Inner diameter max. (mm)
    35
  • Material
    pozink
  • Screw material
    pozink
0,43 0,35 without VAT
Alternatives
Sea Land Waterworks

Info in store
  • Volume [l]
    80
412,41 340,84 without VAT
-3 %
Sewage pumps

In stock
227,67 € 220,84 182,51 without VAT
Alternatives
stuffing lines

Info in store
39,58 32,71 without VAT
Alternatives
stuffing lines

Info in store
25,76 21,29 without VAT
Alternatives
hose clamps

In stock
  • Load moment
    min 13 Nm
  • Screw
    M6x50
  • Thickness
    0,6 mm
  • Width
    20 mm
  • Inner diameter min. (mm)
    32
  • Inner diameter max. (mm)
    35
  • Material
    nerez
  • Screw material
    pozink
0,53 0,44 without VAT
Alternatives
stuffing lines

Info in store
25,76 21,29 without VAT
Alternatives
hose clamps

In stock
  • Screw material
    nerez
  • Load moment
    min 13 Nm
  • Screw
    M5x40
  • Thickness
    0,6 mm
  • Width
    18 mm
  • Inner diameter min. (mm)
    27
  • Inner diameter max. (mm)
    29
  • Material
    nerez
1,21 1,00 without VAT